top of page
Auto Care logo _edited.jpg

Orange Chain and Sprocket kit for DUKE / RC 200 - KIT HPXRO 379NF

Price

₹3,429.00

  • Inner link plates are Black Nickel plating
  • Outer link is Orange powder Coating
  • Enhanced rust protection
  • Lustrous aesthetic
  • Built rigidly for extreme ride conditions
  • Long lasting performance
  • Specially designed for Higher strength
  • Designed for dignity drive
  • Engineered for racing experience
  • Build to endure sudden loads which extend the chain durability

 

    • Suitable Motorcycle: KTM DUKE / RC 200
    • Front Sprocket (Z) : 14 Links
    • Rear Sprocket (Z) : 42 Links
    • Number of Chain Links : 110

     

    Front Sprocket

    • Reliable with high performance & longer life.
    • Smooth operation & higher transmission accuracy.
    • Anti-resistant coating with Superior quality.
    • Anti-wear performance which lets vehicle move with full power.
    • Produced with Hi-Tech accurate machining which reduces noise and provides smoother riding.
    • The fitment of the product is as per OE specification.
    • Heat treated and hand finished to perfection.
    • Every sprocket goes through 18 production stages and 15 individual quality control checks before it is ready to leave the manufacturing facility.

     

    Rear Sprocket

    • Sprockets are manufactured from carbon steel material with duly induction hardened teeth. 
    • Sprockets are only made using the best available materials.
    • Zinc coating to provide better rust prevention.
    • Induction hardening to improve wear resistance with outstanding performance.
    • Shot blasted sprockets with improved surface fatigue strength.
    • Sprockets are made of best surface protection treatment which enables to withstand dust and muddy ride with ease.
    • Sprockets are of made with best position accuracy to ensure better fitment capabilities.
    • Good surface finish that makes ride smoother.

     

    • Lubricate the Chain using ROLON Chain Lube for every 500km in Seal ring chains and every 1000km for Standard Chains.
    • Clean the Chain using ROLON Chain Clean Spray. Every 2500 -3000 km's once chain should be cleaned and then re lubricated.
    • Use nylon brush or soft cloth before lubricating the Chain.
    • Avoid usage of Steel wire brushes to Clean Chain.
    • Don't use petrol, thinner and hot water for cleaning, and high pressure water jet direct contact to seal ring chain should be avoided.
    • Make sure your chain should be in adequate chain slackness - 1 inch min.
    • Dampers should be changed while chain sprocket replacement for better life of Chain Kit.
    • Wear Helmet for Safety - Follow Traffic Rules.

     

    Pack Contents one Rear Sprocket, Front Sprocket, Chain

    Quantity

    bottom of page